Get started on Xebit VoiceCloud

Create an account, build an agent, connect your carrier and make your first call.

Showing instructions for Xebit VoiceCloud.Showing instructions for Xebit VoiceKit, on your own infrastructure. Switch with the selector at the top. Updated 22 October 2026.

On Xebit VoiceCloud, Xebit runs the platform and you work in the dashboard at voice.xebit.ai. Getting to a first real call takes four steps: create an account, build an agent, connect your carrier, and place or answer a call. Most teams do it in a day; the time goes into the agent's instructions, not the setup.

This page is for Xebit VoiceCloud. You have Xebit VoiceKit selected: see Install Xebit VoiceKit instead.

What you need

  • A carrier or SBC that can connect over standard SIP or WebSocket, and at least one number on your SIP trunk. Xebit does not provide numbers or telephony; calls and call charges stay with your carrier.
  • A clear first use case: for example reminding borrowers before an EMI due date, or answering admissions enquiries.
  • Optional: access to your CRM (Zoho or Salesforce) or an endpoint that can receive webhooks, so outcomes land somewhere useful from the first call.

Step 1: Create an account

  1. Go to voice.xebit.ai and create an account for your organisation.
  2. Sign in to the dashboard.
  3. Confirm your plan. Xebit VoiceCloud is about $0.052 per connected minute with a 5,000 minute monthly commitment (about $258) for a minimum of three months. Top ups come in 5,000 minute blocks at the same rate, and unused minutes do not carry into the next month.

The rate covers infrastructure, compute, the AI models, recordings, transcripts, storage, observability and human handoff. Telephony is the only thing you buy separately, from your carrier. See Xebit VoiceCloud for details.

Step 2: Create an agent

  1. Open the agents list in the dashboard and create a new agent.
  2. Name it, choose inbound or outbound, and pick a voice.
  3. Write its instructions: who it represents, how it greets the caller, what it must find out, and when it hands over to a person. Agent Prompting shows how.
  4. Set the language, the hours it works and the fields it should capture on every call, such as a promise to pay date or a candidate's notice period.
  5. Save.

The full walkthrough is in Create an Agent and Configure an Agent. Your plan includes one agent; talk to us if you need more.

Step 3: Connect your carrier

Xebit connects to your carrier over standard SIP or WebSocket, so you keep your trunks, routes and rates.

  1. In the dashboard, open the carrier or telephony settings and add a connection for your trunk.
  2. Use the SIP details the dashboard gives you to point your trunk at Xebit. Your carrier or SBC team usually makes this change on their side.
  3. For inbound calls, route the number on your SIP trunk to the agent that should answer it.
  4. For outbound calls, choose which number on your trunk the agent calls from. Caller ID is presented by your carrier, so confirm with them that the number is allowed as caller ID on that trunk.
  5. Make sure numbers are in international format with the country code, for example +919876543210.

Xebit does not handle DLT registration, number provisioning or carrier compliance. Those stay between you and your carrier.

Step 4: Make your first call

Start with a test call to your own phone, then move to a real number.

Test call from the dashboard

  1. Open the agent and start a test call.
  2. Enter your own mobile number. The agent calls you over your carrier.
  3. Talk to it the way a real customer would: interrupt it, change your mind, ask something it was not told about.
  4. Open the call afterwards to read the transcript, the summary and the captured fields, and listen to the recording.

Inbound call

Dial the number on your SIP trunk that you routed to an inbound agent. The agent should answer within a moment and greet you as instructed.

Outbound call from the API

Create an API key in the dashboard (see API Keys), then start a call with one request. The full field list is in Creating Calls.

curl -X POST https://api.voice.xebit.ai/v1/calls \
  -H "x-api-key: YOUR_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
    "agent_id": "agent_123",
    "user_number": "+919876543210",
    "user_name": "Priya"
  }'

After the first call